The SPure H2O/HC Filter removes moisture, oil, dust, and
hydrocarbons (C5 and heavier) from dry air and inert gases. The
cobalt-free moisture indicator signals breakthrough at 5% relative
humidity and changes from GREEN to BLUE. The SPure H2O/
HC Filter is available in an 88 cc tube, a long 116 cc tube, a 240
cc tube, and an extra large 400 cc tube (shown above from left to
right). SPure Filters have the option of standard compression fittings
and quick connect fittings in 1/4” and 1/8” brass and stainless
steel, or metal push-to-connect fittings in 1/4” and 6 mm for plastic
tubing and non-carrier gas lines.
Note: Filter lifetime is dependent on the quality of incoming gas and the flow rate. |
![]() From Left to Right: 88cc, 116cc, 240cc, 400cc. |
![]() |
![]() |
![]() |
||||
Quick Connect Fittings are used for fast connections and replacements. They have superior seals that use O-rings and check valves to protect gas lines. | Compression Fittings seal well and can be broken and retightened many times if used properly. They are compatible with industry standard ferrules and tubing | Push-to-Connect Fittings are used to connect plastic tubing with a quick and easy connection. They have lower pressure ratings, and permeation through plastic tubing can have some effect on the ultimate purity level of the gas. |